[cisco-voip] TAPS Cisco Call Manager 6.1

[Jonathan Charles]

Check the engine on IPCC... see if the telephony subsystem is in service...

J

On Mon, Mar 17, 2008 at 5:22 PM, Akaal singh <akaalvoip at googlemail.com> wrote:
> I have created the trigger, TAPS rp, all phones are part of TAPS CSS.
>  When I connect a Phone the phone dials the TAPS number but I get a
>  busy signal. Also everything is registed with call manager. I have
>  restarted devices as well.
>
>  A bit lost.....
>
>
>
>
>  On 17/03/2008, Jonathan Charles <jonvoip at gmail.com> wrote:
>  > Did you create a trigger, is the CTI RP (as well as the CTI Ports)
>  > registered with CCM?
>  >
>  > Does the phone have a CSS to call the partition that that trigger is in?
>  >
>  > Are you using G729?
>  >
>  >
>  > Jonathan
>  >
>  > On Mon, Mar 17, 2008 at 11:34 AM, Akaal singh <akaalvoip at googlemail.com>
>  > wrote:
>  > > Hi,
>  > >
>  > > I am having problems with TAPS on CCM 6.1, every time we try to call the
>  > > TAPS number we get a busy line, everything looks like its configured right
>  > > could some one please help me out with this.
>  > > Thank you
>  > >
>  > >
>  > > _______________________________________________
>  > >  cisco-voip mailing list
>  > >  cisco-voip at puck.nether.net
>  > >  https://puck.nether.net/mailman/listinfo/cisco-voip
>  > >
>  > >
>  >
>