[cisco-voip] simple SRST question

[Scott Voll]

I've never needed to do this, but I'm just checking my thoughts.

I have a bunch of Remote sites that use the hq location for dial tone
(PRIs).  But in setting up SRST I have some FXO ports at the remote sites.

I'm not going to setup the FXO's in CM but want to use then in SRST mode.
is that a problem?  I just add the service mgcpapp command to the dial peer
and I should be fine right?

TIA

Scott
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080327/d0f50d68/attachment.html