[cisco-voip] simple SRST question

[Ryan Ratliff]

If you are not going to use them in CM why add them at all?  Simply  
configure them to be used in pots dial-peers and the SRST router  
should have no problem using them.

-Ryan

On Mar 27, 2008, at 12:13 PM, Scott Voll wrote:

I've never needed to do this, but I'm just checking my thoughts.

I have a bunch of Remote sites that use the hq location for dial tone  
(PRIs).  But in setting up SRST I have some FXO ports at the remote  
sites.

I'm not going to setup the FXO's in CM but want to use then in SRST  
mode.  is that a problem?  I just add the service mgcpapp command to  
the dial peer and I should be fine right?

TIA

Scott
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080327/c04dcd59/attachment.html