[cisco-voip] simple SRST question

[Scott Voll]

perfect.  that's what I wanted to hear.  I just didn't know if CM need to
know anything about the ports or not.

THANKS

Scott

On Thu, Mar 27, 2008 at 9:19 AM, Ryan Ratliff <rratliff at cisco.com> wrote:

> If you are not going to use them in CM why add them at all?  Simply
> configure them to be used in pots dial-peers and the SRST router should have
> no problem using them.
>
> -Ryan
>
>   On Mar 27, 2008, at 12:13 PM, Scott Voll wrote:
> I've never needed to do this, but I'm just checking my thoughts.
>
> I have a bunch of Remote sites that use the hq location for dial tone
> (PRIs).  But in setting up SRST I have some FXO ports at the remote sites.
>
> I'm not going to setup the FXO's in CM but want to use then in SRST mode.
> is that a problem?  I just add the service mgcpapp command to the dial peer
> and I should be fine right?
>
> TIA
>
> Scott
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080327/7473a1b7/attachment.html