[cisco-voip] Mobility Manager 1.2 w/CUCM5.1.1 strip calling number digit

[Grisham, Tom]

In our CUCM 5.1.1 PSTN gateways pre-pend a 9,1 onto the calling number
on every inbound PSTN call to the cluster.  This is set from a
cluster-wide service parameter as I recall.
 
My problem is when a DN is under shared CTI control for Mobility Manager
the outgoing CallID, ie, Calling Party Number sent to the remote cell
phone retains the 9,1 digits.
 
I would appreciated any advise on where to strip or transform Calling
Party Numbers in a Mobility Manager 1.2 setup.
 
Thanks,
Tom Grisham
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080331/384080fb/attachment.html