[cisco-voip] CME 3.0 as a pstn

[Unni]

Hi all

I would like to use cisco 7960 Installed with CME 3.1 as a pstn switch for
my lab setup, but the t1PRI never comes ip as Multiframe established,
A(lways on  Awiting establishment state or TEI _Assigned state. Verified the
clock settings on 1760 ( Tdm). Then removed the telephony- service
completely and try to register it as a MGCP gateway , under int se0/1:23  ,
ISDN Bind-l3  ccm manager option is not avaolable only optionis isdn bind-l3
Q931, changed the Ios version still no luck . Any one with suggestions

thanks

unni
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080506/6a25880d/attachment.html