[cisco-voip] CME 3.0 as a pstn

[Jorge L. Rodriguez Aguila]

Are you Running one side as network and the other side as user on The PRIs?


Jorge Rodríguez Aguila
CCNA,CCVP,CRMCS,CIPCES
Senior Voice/Data Network Consultant
Netxar Technologies
jorge.rodriguez at netxar.com
Office 787-765-0058
PCS 787-688-8530
[cid:image001.png at 01C8AFB2.3D6185A0]



From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Unni
Sent: Tuesday, May 06, 2008 12:28 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CME 3.0 as a pstn

Hi all

I would like to use cisco 7960 Installed with CME 3.1 as a pstn switch for my lab setup, but the t1PRI never comes ip as Multiframe established, A(lways on  Awiting establishment state or TEI _Assigned state. Verified the clock settings on 1760 ( Tdm). Then removed the telephony- service completely and try to register it as a MGCP gateway , under int se0/1:23  , ISDN Bind-l3  ccm manager option is not avaolable only optionis isdn bind-l3 Q931, changed the Ios version still no luck . Any one with suggestions

thanks

unni

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080506/9f73e4bc/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 6292 bytes
Desc: image001.png
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20080506/9f73e4bc/attachment-0001.png