[cisco-voip] Tandberg Edge 85 MXP

[Mike Hawley (AU)]

Hi, I have had a problem with Tandberg's calling SCCP video endpoints and getting video - Audio is fine.  What I have found is that the Tandberg's need to be trained down to H.263 for the video to work successfully.  The devices all use the CUCM6 for call control.  They are all in the same location and region, so no bandwidth limitations.

Has anyone struck this problem before?

All the best

Mike Hawley


******************************************************************************
 - NOTICE FROM DIMENSION DATA AUSTRALIA
This message is confidential, and may contain proprietary or legally privileged information.  If you have received this email in error, please notify the sender and delete it immediately.

Internet communications are not secure. You should scan this message and any attachments for viruses.  Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments.
******************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080510/edc9e561/attachment.html