[cisco-voip] Multi Voice ports with one Dial-peer

[Matthew Saskin]

Trunk groups:

!
trunk group pstn
voice-port 0/1/1
  trunk-group pstn 1
voice-port 0/1/2
  trunk-group pstn 2
voice-port 0/1/3
  trunk-group pstn 3
dial-peer voice 11 pots
  destination-pattern 9.t
  trunkgroup pstn
!

new look wrote:
>
> Dear All,
>
> Please can any one help me by the commands needed to assign multiple 
> voice ports with only one dial-peer
>
>  
>
> i mean at the below example to configure only one dial peer with 
> parameter grouping all voice ports as all of dial peer 11,12 and 13 is 
> contain the same parameters.
>
>  
>
> voice-port 0/1/1
>  !
> voice-port 0/1/2
>  !
> voice-port 0/1/3
> ! 
>
> dial-peer voice 11 pots
>  destination-pattern 9.T
>  port 0/1/1
> !
> dial-peer voice 12 pots
>  destination-pattern 9.T
>  port 0/1/2
> !
> dial-peer voice 13 pots
>  destination-pattern 9.T
>  port 0/1/3
> !
>
>  
>
> Thanks in advance
>
>
> ------------------------------------------------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try 
> it now. 
> <http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ%20> 
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>