[cisco-voip] CCM 4.x MGCP T1 E&M Wink Start

[Nick Griffin]

Take a look at "debug vpm signal, and inspect the "DIGIT_COLLECT" section.
That should tell you the digits your receiving.

On Thu, May 15, 2008 at 9:30 PM, Dustin S. Fowler <dustin.s.fowler at gmail.com>
wrote:

>  All,
>
>
>
> I am trying to figure out if a number is coming inbound to a E&M Wink Start
> T1 configure in MGCP. The 'debug ISDN q931' for the reason that it is not a
> ISDN PRI.
>
> Any help is welcomed.
>
>
>
> Semper Fidelis,
>
>
>
> Dustin
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080515/5f452c7d/attachment.html