[cisco-voip] CCM 4.x MGCP T1 E&M Wink Start

Thu May 15 22:46:36 EDT 2008

Thank you for your help.

Below  is what I received. Can you help me decode? What is the received
number? 

.May 15 22:42:49: htsp_process_event: [0/0/0:1(1), EM_ONHOOK,
E_DSP_SIG_1100]em_onhook_offhook

.May 15 22:42:49: htsp_timer - 50 msec

.May 15 22:42:49: htsp_process_event: [0/0/0:1(1), EM_QUALIFY_SEIZURE,
E_HTSP_EVENT_TIMER]em_qualify_seizure_timeouthtsp_setup_ind

.May 15 22:42:49: [0/0/0:1(1)] get_local_station_id calling num= calling
name= calling time=05/15 22:42  orig called=

.May 15 22:42:49: htsp_timer - 3000 msec

.May 15 22:42:49: htsp_process_event: [0/0/0:1(1), EM_WAIT_SETUP_ACK,
E_HTSP_SETUP_ACK]em_wait_setup_ack_get_ack

.May 15 22:42:49: htsp_timer_stop interdigit timer cfgd to 3000

.May 15 22:42:49: htsp_timer2 - 128 msec

.May 15 22:42:49: htsp_process_event: [0/0/0:1(1), EM_WAIT_SETUP_ACK,
E_HTSP_EVENT_TIMER2]em_wait_prewink_timer

.May 15 22:42:49: em_offhook (0)vnm_dsp_set_sig_state:[recEive and
transMit0/0/0:1(1)] set signal state = 0x8em_onhook
(200)vnm_dsp_set_sig_state:[recEive and transMit0/0/0:1(1)] set signal state
= 0x0

.May 15 22:42:49: htsp_digit_ready: digit = 38

.May 15 22:42:49: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_VTSP_DIGIT]em_offhook_digit_collect

.May 15 22:42:49: htsp_digit_ready: digit = 30

.May 15 22:42:49: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_VTSP_DIGIT]em_offhook_digit_collect

.May 15 22:42:49: htsp_digit_ready: digit = 30

.May 15 22:42:49: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_VTSP_DIGIT]em_offhook_digit_collect

.May 15 22:42:49: htsp_digit_ready: digit = 36

.May 15 22:42:49: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_VTSP_DIGIT]em_offhook_digit_collect

.May 15 22:42:50: htsp_digit_ready: digit = 35

.May 15 22:42:50: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_VTSP_DIGIT]em_offhook_digit_collect

.May 15 22:42:50: htsp_digit_ready: digit = 32

.May 15 22:42:50: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_VTSP_DIGIT]em_offhook_digit_collect

.May 15 22:42:50: htsp_digit_ready: digit = 35

.May 15 22:42:50: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_VTSP_DIGIT]em_offhook_digit_collect

.May 15 22:42:50: htsp_digit_ready: digit = 36

.May 15 22:42:50: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_VTSP_DIGIT]em_offhook_digit_collect

.May 15 22:42:50: htsp_digit_ready: digit = 32

.May 15 22:42:50: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_VTSP_DIGIT]em_offhook_digit_collect

.May 15 22:42:50: htsp_digit_ready: digit = 36

.May 15 22:42:50: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_VTSP_DIGIT]em_offhook_digit_collect

.May 15 22:42:50: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_HTSP_VOICE_CUT_THROUGH]em_offhook_voice_cut

.May 15 22:42:50: htsp_call_bridged invoked

.May 15 22:42:50: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_HTSP_VOICE_CUT_THROUGH]em_offhook_voice_cut

.May 15 22:42:53: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_DSP_SIG_0000]em_offhook_onhook, HF duration=0

.May 15 22:42:53: mlpp_supported_interface MLPP supported on this trunk

.May 15 22:42:53: mlpp_detection_enabled Preemption detection is not enabled

.May 15 22:42:53: em_start_timer: 0 ms

.May 15 22:42:53: htsp_timer - 0 msec

.May 15 22:42:53: htsp_process_event: [0/0/0:1(1), EM_OFFHOOK,
E_HTSP_EVENT_TIMER]em_offhook_wait_release_req

.May 15 22:42:53: htsp_timer_stop

.May 15 22:42:53: htsp_timer_stop2

.May 15 22:42:53: htsp_process_event: [0/0/0:1(1), EM_RLS_WAIT_RLS_REQ,
E_HTSP_RELEASE_REQ]em_wait_rls_release em_onhook
(0)vnm_dsp_set_sig_state:[recEive and transMit0/0/0:1(1)] set signal state =
0x0

.May 15 22:42:53: em_start_timer: 400 ms

.May 15 22:42:53: htsp_timer - 400 msec

.May 15 22:42:53: htsp_process_event: [0/0/0:1(1), EM_WAIT_CLR_DONE,
E_HTSP_EVENT_TIMER]em_clr_done

.May 15 22:42:53: htsp_process_event: [0/0/0:1(1), EM_ONHOOK,
E_DSP_SIG_0000]em_onhook_onhook

From: Nick Griffin [mailto:nick.jon.griffin at gmail.com] 
Sent: Thursday, May 15, 2008 10:41 PM
To: Dustin S. Fowler
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CCM 4.x MGCP T1 E&M Wink Start

Take a look at "debug vpm signal, and inspect the "DIGIT_COLLECT" section.
That should tell you the digits your receiving.

On Thu, May 15, 2008 at 9:30 PM, Dustin S. Fowler
<dustin.s.fowler at gmail.com> wrote:

All,

I am trying to figure out if a number is coming inbound to a E&M Wink Start
T1 configure in MGCP. The 'debug ISDN q931' for the reason that it is not a
ISDN PRI. 

Any help is welcomed.

Semper Fidelis,

Dustin 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080515/f947d24b/attachment.html 