[cisco-voip] CCM 6.1 vs CCM 4.2.3

[Ed Leatherman]

If you do alot of stuff with CDR records and are used to just hopping in and
running queries from the MSSQL server, keep in mind you don't have direct
database access on the 6.1 appliance. You can still get the CDRs easily by
specifying an external server to put them on, and if you know how to work
with the SOAP interface you can even run SQL commands, it just wont be the
same as your used to. CAR is still there too, for what its worth. 4.3 i
assume is till MSSQL just on win2k3.

6.1 has better database resiliency and resiliency for user facing features
than any of the previous versions.

On Thu, May 29, 2008 at 7:04 PM, Scott Voll <svoll.voip at gmail.com> wrote:

> Whole new platform.  it's running on a linux appliance platform.  it has a
> backup partition for quick roll back of upgrades, it has added features not
> in the 4.x version.  It's a whole new ball game but the basics are the same.
>
> Scott
>
> On Thu, May 29, 2008 at 7:14 AM, Syed Khalid Ali <
> khalid_khursheed at hotmail.com> wrote:
>
>>
>> What is difference b/w CCM 4.2 and CCM 6.1 apart from SIP support. We are
>> looking to some better options in CDR. Is it worth to go ahead with CCM 6.1?
>> Do you have any comparison chart  for these products.
>>
>> Regards,
>>
>> Khalid
>>
>>  ------------------------------
>> Date: Wed, 28 May 2008 08:08:26 -0700
>> From: svoll.voip at gmail.com
>> To: jonvoip at gmail.com
>> Subject: Re: [cisco-voip] CCM 4.2.3 (on 7825) upgrade to CCM 6.1
>> CC: khalid_khursheed at hotmail.com; cisco-voip at puck.nether.net
>>
>> Which means you will need to purchase another server to run the IPCC 5.0
>> application because it is not supported co-resident.
>>
>> Scott
>>
>> On Wed, May 28, 2008 at 7:17 AM, Jonathan Charles <jonvoip at gmail.com>
>> wrote:
>>
>> If the 7825 meets the following requirements, you should be fine,
>> 2.0Ghz processor, 2GB of RAM and 72GB of HD.
>>
>> You will need to upgrade to IPCC 5.0
>>
>>
>>
>> Jonathan
>>
>> On Wed, May 28, 2008 at 8:01 AM, Syed Khalid Ali
>> <khalid_khursheed at hotmail.com> wrote:
>> > Hi to all,
>> >
>> > We have CallManager 4.2.3 running on MCS 7825-I2. Just checked on
>> Cisco.com
>> > and it says that it can be upgraded to CCM 6.1, however I am not sure if
>> CCM
>> > 6.1 is supported on MCS 7825-I2. Further we have 2 machines running CCM
>> (on
>> > Published and other is Subscriber). Suscriber is also running IPCC
>> Express
>> > 4.0.2.
>> >
>> > Need suggestion!
>> >
>> > Regards
>> >
>> > Khalid
>> >
>> > ________________________________
>> > Invite your mail contacts to join your friends list with Windows Live
>> > Spaces. It's easy! Try it!
>> > _______________________________________________
>> > cisco-voip mailing list
>> > cisco-voip at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/cisco-voip
>> >
>> >
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>
>> ------------------------------
>> Get news, entertainment and everything you care about at Live.com. Check
>> it out! <http://www.live.com/getstarted.aspx>
>>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080529/1039f514/attachment-0001.html>