[cisco-voip] Regions in CCME

[Ryan Ratliff]

You can also set the codec per ephone. 
 

-Ryan 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Vince Loschiavo
Sent: Thursday, November 06, 2008 4:22 PM
To: omar parihuana; cisco-voip
Subject: Re: [cisco-voip] Regions in CCME



In CCME.the way this is accomplished is with VoIP Dial-peers

 

Example:

 

Dial-peer voice 100 voip

Destination pattern 4xxx

Codec g729

                Session target ipv4:10.1.1.1

 

Double check my syntax as I typed this from memory.

 

 

Vincent Loschiavo
Cisco Practice Director
cid:image001.gif at 01C8D09B.0C46BD50
8200 NW 41st Street, Suite 130
Miami, FL  33166
Ofc: 954-671-5669
Cell: 786-282-1164
Fax: 888-767-5905
Email:  <mailto:vloschiavo at data-corporation.com>
vloschiavo at data-corporation.com

"KEEPING YOUR BUSINESS HIGHLY AVAILABLE"
partner-logos

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of omar parihuana
Sent: Thursday, November 06, 2008 3:46 PM
To: cisco-voip
Subject: [cisco-voip] Regions in CCME

 

Hi List,

Actually I have a CCME running and up, in the next days I'm going to install
a new router in remote site there are about 10 IP Phones. So I need to
calculate the BW between HDQ and remote site. Currently we use g711 but I
believe that in remote site I should use G729. In CCM exist the concept of
regions, in order to determine which codec to use when the call acroos one
region to other region. is there the same concept in CCME? how can I
configure the remote site/CCME in order to use G729 when the calls acroos
from branch to HDQ?

Thanks for your suggestion...

Rgds.

-- 
Omar E.P.T
-----------------
Certified Networking Professionals make better Connections!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081106/5a90b0c6/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1017 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081106/5a90b0c6/attachment-0002.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 5783 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081106/5a90b0c6/attachment-0003.gif>