[cisco-voip] Regions in CCME

[xoaxix]

Hi , i think you need to use Pattern fot that,


Example.

if you extension range is 7000 to 7100  use 70[23]0    to remote site


*dial-peer voice 9999 voip
 destination-pattern 70[2-3]0
 codec g729ullaw
*









On Thu, Nov 6, 2008 at 6:35 PM, omar parihuana <omar.parihuana at gmail.com>wrote:

> Hi,
>
> Thank you for your response...  However I'm facing two issues:
>
> i. In remote site there is not a voice gateway only conventional router.
> what's more the dial-plan is flat, so the branch site will have the same
> extension range.
>
> ii. Regarding to set the codec per ephone, when the call whitin the branch
> will be G711 or G729 ? it's possible to use G711 whitin the branch and G729
> when the call accross the WAN?
>
> Thanks again!!
>
>
>
> On Thu, Nov 6, 2008 at 4:54 PM, Ryan Ratliff <rratliff at cisco.com> wrote:
>
>>  You can also set the codec per ephone.
>>
>>
>> -Ryan
>>
>>
>>  ------------------------------
>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Vince Loschiavo
>> *Sent:* Thursday, November 06, 2008 4:22 PM
>> *To:* omar parihuana; cisco-voip
>> *Subject:* Re: [cisco-voip] Regions in CCME
>>
>>  In CCME…the way this is accomplished is with VoIP Dial-peers
>>
>>
>>
>> Example:
>>
>>
>>
>> Dial-peer voice 100 voip
>>
>> Destination pattern 4xxx
>>
>> Codec g729
>>
>>                 Session target ipv4:10.1.1.1
>>
>>
>>
>> Double check my syntax as I typed this from memory.
>>
>>
>>
>>
>>
>> *Vincent Loschiavo*
>> *Cisco Practice Director*
>> *[image: cid:image001.gif at 01C8D09B.0C46BD50]*
>> *8200 NW 41st Street, Suite 130*
>> *Miami, FL  33166*
>> *Ofc: **954-671-5669*
>> *Cell:** **786-282-1164
>> **Fax:** **888-767-5905*
>> *Email:** **vloschiavo at data-corporation.com**
>>
>> **"KEEPING YOUR BUSINESS HIGHLY AVAILABLE"
>> **[image: partner-logos]*
>>
>>
>>
>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *omar parihuana
>> *Sent:* Thursday, November 06, 2008 3:46 PM
>> *To:* cisco-voip
>> *Subject:* [cisco-voip] Regions in CCME
>>
>>
>>
>> Hi List,
>>
>> Actually I have a CCME running and up, in the next days I'm going to
>> install a new router in remote site there are about 10 IP Phones. So I need
>> to calculate the BW between HDQ and remote site. Currently we use g711 but I
>> believe that in remote site I should use G729. In CCM exist the concept of
>> regions, in order to determine which codec to use when the call acroos one
>> region to other region. is there the same concept in CCME? how can I
>> configure the remote site/CCME in order to use G729 when the calls acroos
>> from branch to HDQ?
>>
>> Thanks for your suggestion...
>>
>> Rgds.
>>
>> --
>> Omar E.P.T
>> -----------------
>> Certified Networking Professionals make better Connections!
>>
>
>
>
> --
> Omar E.P.T
> -----------------
> Certified Networking Professionals make better Connections!
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081107/56671aba/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1017 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081107/56671aba/attachment-0002.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 5783 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081107/56671aba/attachment-0003.gif>