[cisco-voip] Regions in CCME

[Jason Roysdon]

I think you'd want to do it via the dial-peer though, as phone-to-phone
at the local site would be best at g722 or at least g711.

Ryan Ratliff wrote:
> You can also set the codec per ephone.
>  
> 
> -Ryan
> 
>  
> 
> ------------------------------------------------------------------------
> *From:* cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *Vince Loschiavo
> *Sent:* Thursday, November 06, 2008 4:22 PM
> *To:* omar parihuana; cisco-voip
> *Subject:* Re: [cisco-voip] Regions in CCME
> 
> In CCME…the way this is accomplished is with VoIP Dial-peers
> 
>  
> 
> Example:
> 
>  
> 
> Dial-peer voice 100 voip
> 
> Destination pattern 4xxx
> 
> Codec g729
> 
>                 Session target ipv4:10.1.1.1
> 
>  
> 
> Double check my syntax as I typed this from memory.
> 
>  
> 
>  
> 
> *Vincent Loschiavo*
> *Cisco Practice Director*
> *cid:image001.gif at 01C8D09B.0C46BD50*
> *8200 NW 41st Street, Suite 130*
> *Miami, FL  33166*
> *Ofc: **954-671-5669*
> *Cell:** **786-282-1164
> **Fax:** **888-767-5905*
> *Email:** **vloschiavo at data-corporation.com
> <mailto:vloschiavo at data-corporation.com>**
> 
> */"KEEPING YOUR BUSINESS HIGHLY AVAILABLE"
> //partner-logos/
> 
>  
> 
> *From:* cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *omar parihuana
> *Sent:* Thursday, November 06, 2008 3:46 PM
> *To:* cisco-voip
> *Subject:* [cisco-voip] Regions in CCME
> 
>  
> 
> Hi List,
> 
> Actually I have a CCME running and up, in the next days I'm going to
> install a new router in remote site there are about 10 IP Phones. So I
> need to calculate the BW between HDQ and remote site. Currently we use
> g711 but I believe that in remote site I should use G729. In CCM exist
> the concept of regions, in order to determine which codec to use when
> the call acroos one region to other region. is there the same concept in
> CCME? how can I configure the remote site/CCME in order to use G729 when
> the calls acroos from branch to HDQ?
> 
> Thanks for your suggestion...
> 
> Rgds.
> 
> -- 
> Omar E.P.T
> -----------------
> Certified Networking Professionals make better Connections!
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip