[cisco-voip] CUE GUI

[Bill Talley]

Just trying not to make an assumption that all setup has been completed.
Have you done setup on the cue module itself?   You won't be able to use the
gui until cue has been initialized.
 
To initialize the cue module, from the router, execute the command
'service-module service-engine 1/0 session'.

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nick
Sent: Tuesday, November 25, 2008 8:52 AM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] CUE GUI


I have a 2851 with CUE-NME module installed on IOS
c2800nm-ipvoicek9-mz.124-15.T7, I have configured the module as shown
 
interface Integrated-Service-Engine1/0
 ip unnumbered GigabitEthernet0/0
 service-module ip address 10.196.243.14 255.255.255.0
 service-module ip default-gateway 10.196.243.1
 no keepalive
!
ip route 10.196.243.14 255.255.255.255 Integrated-Service-Engine1/0
 
I have also enable sip-ua and added a sip dial-peer, what should the
destination -pattern point to under this dialpeer?
 
I can ping the module but I am unable to browse to the GUI, can anyone help
with what I could be missing?
 
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081125/f1af1b6a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3072 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081125/f1af1b6a/attachment.bin>
-------------- next part --------------



CONFIDENTIALITY NOTICE: This electronic mail transmission (including any accompanying attachments) is intended solely for its authorized recipient(s), and may contain confidential and/or legally privileged information. If you are not an intended recipient, or responsible for delivering some or all of this transmission to an intended recipient, be aware that any review, copying, printing, distribution, use or disclosure of the contents of this message is strictly prohibited. If you have received this electronic mail message in error, please delete it from your system without copying it, and contact sender immediately by Reply e-mail, or by calling 913-307-2300, so that our address records can be corrected.

Although this e-mail and any attachments are believed to be free of any virus or other defect that might negatively affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by the sender for any loss or damage arising in any way in the event that such a virus or defect exists.