[cisco-voip] CUE GUI

[Nick]

Thanks Bill, I'm now configuring the module and should hopefully be able to
get on soon.

2008/11/25 Bill Talley <billt at aos5.com>

>  Just trying not to make an assumption that all setup has been completed.
> Have you done setup on the cue module itself?   You won't be able to use the
> gui until cue has been initialized.
>
> To initialize the cue module, from the router, execute the command
> 'service-module service-engine 1/0 session'.
>
>  ------------------------------
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Nick
> *Sent:* Tuesday, November 25, 2008 8:52 AM
> *To:* cisco-voip at puck-nether.net
> *Subject:* [cisco-voip] CUE GUI
>
>   I have a 2851 with CUE-NME module installed on
> IOS c2800nm-ipvoicek9-mz.124-15.T7, I have configured the module as shown
>
> interface Integrated-Service-Engine1/0
>  ip unnumbered GigabitEthernet0/0
>  service-module ip address 10.196.243.14 255.255.255.0
>  service-module ip default-gateway 10.196.243.1
>  no keepalive
> !
> ip route 10.196.243.14 255.255.255.255 Integrated-Service-Engine1/0
>
> I have also enable sip-ua and added a sip dial-peer, what should the
> destination -pattern point to under this dialpeer?
>
> I can ping the module but I am unable to browse to the GUI, can anyone help
> with what I could be missing?
>
>
>
>
>
>
>
> CONFIDENTIALITY NOTICE: This electronic mail transmission (including any
> accompanying attachments) is intended solely for its authorized
> recipient(s), and may contain confidential and/or legally privileged
> information. If you are not an intended recipient, or responsible for
> delivering some or all of this transmission to an intended recipient, be
> aware that any review, copying, printing, distribution, use or disclosure of
> the contents of this message is strictly prohibited. If you have received
> this electronic mail message in error, please delete it from your system
> without copying it, and contact sender immediately by Reply e-mail, or by
> calling 913-307-2300, so that our address records can be corrected.
>
> Although this e-mail and any attachments are believed to be free of any
> virus or other defect that might negatively affect any computer system into
> which it is received and opened, it is the responsibility of the recipient
> to ensure that it is virus free and no responsibility is accepted by the
> sender for any loss or damage arising in any way in the event that such a
> virus or defect exists.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081125/bba8de0a/attachment.html>