[cisco-voip] CUE GUI

Tue Nov 25 12:39:15 EST 2008

I'm now having an issue with the module constatly re booting after running
the 'service-module service-engine 1/0 session'.command itr gets to the
Enter Administrator user ID and then reboots and goes through the
initializing process again.  Anyone had this before could the module be
faulty?

IMPORTANT::
Enter administrator user ID:
  (user ID):
MONITOR SHUTDOWN...
INIT: Sending processes the TERM signal
Restarting system.
Brd1 Nmi Npx0 Dly P92 Sha0 Kbd0 Cmos Pci Dma0 PrtB Tim Exp Rfsh Geom
Initializing memory.  Please wait. Mem0 Mem1 Ebda Sha1 CacheE Admgr1 Memmgr1
AdmgrEbda Media LowBi
Swap to secondary BIOS ... Mem1 Ebda Sha1 CacheE Admgr1 Memmgr1 AdmgrEbda
Media LowBios Brd2 Cache
Par PciEnum Vid1 Redir Brd6 Com KbdBuf SMM
General Software Firmbase[r] SMM Kernel 1.3.2 Feb 11 2005 11:51:07
Intel(R) E7320 Performance Development Platform

EIST: Enhanced Intel Speedstep Driver, V3.0.
EIST: Copyright (C) 2003-2006 General Software, Inc.
EIST: Built Mar  3 2006, 14:49:27
UsbHid Pwd Msg0 Msg1 Cache1 Mem2 Prot Cache2 Flg Siz0 Msg2 Ata Dsk Npx1 Apm
Err Dbg Enb App MemRed
 Com Admgr2 Cfg Brd10
DDR2 Memory 511 MB with ECC detected
Intel(R) Celeron(R) M processor         1.00GHz
BIOS ISE 5.00, Build date: 05/05/06
System Now Booting ...
704 832 968 1040 1172 1184 1196 1208 1220 1228 1240 1260 1276 1288 1304 1320
1332 1348 1368 1380 1
eturned:33
9b60745366cf54abffdb993a9f39e5fd

Booting from Secure secondary boot loader..., please wait.
[BOOT-ASM]

Please enter '***' to change boot configuration:
ACPI: Unable to locate RSDP
kdb_cmd[0]: defcmd archkdb "" "First line arch debugging"
kdb_cmd[6]: defcmd archkdbcpu "" "archkdb with only tasks on cpus"
kdb_cmd[12]: defcmd archkdbshort "" "archkdb with less detailed backtrace"
kdb_cmd[18]: defcmd archkdbcommon "" "Common arch debugging"
in atrace_init
Using existing trace log
e1000_setup_copper_link: forced mode continue 1
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
ata1: disabling port
Verifying application level programs
Application level programs verification OK!
INIT: version 2.86 booting
Started device management daemon v1.3.25 for /dev
mounting sys fs ...
mounting /dev/shm tmpfs ...
mounting /proc/bus/usb ...
reiser root fs ...
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
Reiserfs super block in block 16 on 0x801 of format 3.6 with standard
journal
Blocks (total/free): 19537040/19464270 by 4096 bytes
Reiserfs super block in block 16 on 0x801 of format 3.6 with standard
journal
Blocks (total/free): 19537040/19464270 by 4096 bytes
FILESYSTEM CLEAN
Remounting the root filesystem read-write...
Power button monitor started
kernel.sem = 1900 32000 32 128
vm.overcommit_memory = 1

                Welcome to Cisco Service Engine

********** rc.aesop ****************
rsrc_file:/etc/bryce_rsrc_file
Populating resource values from /etc/bryce_rsrc_file
==> Start quack
rsrc_file:/etc/default_rsrc_file
Populating resource values from /etc/default_rsrc_file
rsrc_file:/etc/products/cue/default_rsrc_file
Populating resource values from /etc/products/cue/default_rsrc_file
entry : change cli_server:standalone:int32:0
rsrc_file:/etc/products/cue/bryce_rsrc_file
Populating resource values from /etc/products/cue/bryce_rsrc_file
Processing: /sw/installed/manifest/en_GB_lang_manifest.sig
Processing: /sw/installed/manifest/gpl_infrastructure_manifest.sig
Processing: /sw/installed/manifest/thirdparty_infrastructure_manifest.sig
Processing: /sw/installed/manifest/installer_manifest.sig
Processing: /sw/installed/manifest/oscore_manifest.sig
Processing: /sw/installed/manifest/telephony_infrastructure_manifest.sig
Processing: /sw/installed/manifest/bootloader_prim_manifest.sig
Processing: /sw/installed/manifest/lang_support_manifest.sig
Processing: /sw/installed/manifest/bootloader_sec_manifest.sig
Processing: /sw/installed/manifest/global_manifest.sig
Processing: /sw/installed/manifest/infrastructure_manifest.sig
Processing: /sw/installed/manifest/voicemail_manifest.sig
Populating internal database
...................................................... complete.
==> Management interface is eth0
==> Management interface is eth0
Serial Number: FOC12420D29
Size of buff is: 65536
65536 bytes written
Reading License... Parsing...
200 MAILBOX LICENSE
Parsing...
NULL IVR LICENSE
Parsing...
8 PORT BASE LICENSE
Core:
 - Total usable system ports: 8
/tmp/license/voicemail_lic.sig
/tmp/license/ivr_lic.sig
/tmp/license/port_lic.sig
done
Reading Limits...
Processing: /lib/python2.3/startup/limits.xml
Processing: /bin/products/cue/limits.xml
done
INIT: Entering runlevel: 2
********** rc.post_install ****************
INIT: Switching to runlevel: 4
INIT: Sending processes the TERM signal
STARTED: ntp_startup.sh
STARTED: LDAP_startup.sh
STARTED: SQL_startup.sh
STARTED: dwnldr_startup.sh
STARTED: HTTP_startup.sh
STARTED: probe
STARTED: superthread_startup.sh
STARTED: ${ROOT}/usr/wfavvid/run
Booting: [#######################>...................................] 38%
waiting 74 ...
MONITOR SHUTDOWN...
Booting: [###########################################################>] 100%
waiting 75 ...
IMPORTANT::
IMPORTANT::        Administrator Account Creation
IMPORTANT::
IMPORTANT:: Create an administrator account. With this account,
IMPORTANT:: you can log in to the Cisco Unity Express GUI and
IMPORTANT:: run the initialization wizard.
IMPORTANT::
Enter administrator user ID:
INIT: Sending processes the TERM signal
Restarting system.

2008/11/25 Nick <csvoip at googlemail.com>

> Thanks Bill, I'm now configuring the module and should hopefully be able to
> get on soon.
>
> 2008/11/25 Bill Talley <billt at aos5.com>
>
>>   Just trying not to make an assumption that all setup has been
>> completed.  Have you done setup on the cue module itself?   You won't be
>> able to use the gui until cue has been initialized.
>>
>> To initialize the cue module, from the router, execute the command
>> 'service-module service-engine 1/0 session'.
>>
>>  ------------------------------
>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Nick
>> *Sent:* Tuesday, November 25, 2008 8:52 AM
>> *To:* cisco-voip at puck-nether.net
>> *Subject:* [cisco-voip] CUE GUI
>>
>>   I have a 2851 with CUE-NME module installed on
>> IOS c2800nm-ipvoicek9-mz.124-15.T7, I have configured the module as shown
>>
>> interface Integrated-Service-Engine1/0
>>  ip unnumbered GigabitEthernet0/0
>>  service-module ip address 10.196.243.14 255.255.255.0
>>  service-module ip default-gateway 10.196.243.1
>>  no keepalive
>> !
>> ip route 10.196.243.14 255.255.255.255 Integrated-Service-Engine1/0
>>
>> I have also enable sip-ua and added a sip dial-peer, what should the
>> destination -pattern point to under this dialpeer?
>>
>> I can ping the module but I am unable to browse to the GUI, can anyone
>> help with what I could be missing?
>>
>>
>>
>>
>>
>>
>>
>> CONFIDENTIALITY NOTICE: This electronic mail transmission (including any
>> accompanying attachments) is intended solely for its authorized
>> recipient(s), and may contain confidential and/or legally privileged
>> information. If you are not an intended recipient, or responsible for
>> delivering some or all of this transmission to an intended recipient, be
>> aware that any review, copying, printing, distribution, use or disclosure of
>> the contents of this message is strictly prohibited. If you have received
>> this electronic mail message in error, please delete it from your system
>> without copying it, and contact sender immediately by Reply e-mail, or by
>> calling 913-307-2300, so that our address records can be corrected.
>>
>> Although this e-mail and any attachments are believed to be free of any
>> virus or other defect that might negatively affect any computer system into
>> which it is received and opened, it is the responsibility of the recipient
>> to ensure that it is virus free and no responsibility is accepted by the
>> sender for any loss or damage arising in any way in the event that such a
>> virus or defect exists.
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081125/dbdff177/attachment-0001.html>