[cisco-voip] mwi not turning on
Michael Thompson
mthompson729 at gmail.com
Wed Oct 1 23:57:44 EDT 2008
You MAY have to make the following change in CUE.
Semantics are the same, but it might be finicky.
ccn application ciscomwiapplication aa
parameter "strMWI_OFF_DN" "8001...." <---
parameter "strMWI_ON_DN" "8000...." <---
end application
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dan Letkeman
Sent: Tuesday, September 30, 2008 11:21 PM
To: William Roy; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] mwi not turning on
I have double checked three of the routers in our system and they are
all setup the same way including the one that is not working:
CME:
!
ephone-dn 143
number 8000....
mwi on
!
!
ephone-dn 144
number 8001....
mwi off
!
Unity Express:
ccn application ciscomwiapplication aa
description "ciscomwiapplication"
enabled
maxsessions 6
script "setmwi.aef"
parameter "CallControlGroupID" "0"
parameter "strMWI_OFF_DN" "8001"
parameter "strMWI_ON_DN" "8000"
end application
Any other ideas?
Dan.
On Tue, Sep 30, 2008 at 10:03 PM, William Roy <William.Roy at l7.com.au> wrote:
> Check that you have set MWI indicate on and off numbers in Unity Express.
Then on CUCME check your ephone-dn's that has been setup for MWI on and off
and make sure it has the corresponding number for the MWI with the
appropriate amount of dots after the number to match the number of digits
for your extensions,
>
> ie. if you have 4 digit dialling
>
> !
> ephone-dn 2
> number 2000....
> mwi on
> !
> ephone-dn 3
> number 2001....
> mwi off
> !
>
> regards
> Wil
> ________________________________________
> From: cisco-voip-bounces at puck.nether.net
[cisco-voip-bounces at puck.nether.net] On Behalf Of Dan Letkeman
[danletkeman at gmail.com]
> Sent: Wednesday, 1 October 2008 10:39 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] mwi not turning on
>
> Hello,
>
> I have 12 ISR routers in our organization. All of them are running
> the same version of CUCME and Unity Express. One of the locations has
> issues with the MWI light not working on any of the phones. Is there
> a place that I can start troubleshooting?
>
> Thanks,
> Dan.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list