[cisco-voip] Strange issue with ATA186 on CCM 6

[pavan katta]

Louis,

This may be moot but can you double-check any issues with replication ?
I have seen similar things in the past due to DB replication.

-Pavan

On Thu, Oct 9, 2008 at 11:55 AM, Louis Koekemoer (ZA) <
Louis.Koekemoer at za.didata.com> wrote:

>  I have a strange issue. I plug a new ATA186 on a CCM 6.1.2.1104-1
> cluster, and it registers as we all know it to do. The next step is to move
> it to the correct device pool and location. I save it, and then reset and
> restart. >From this ATA I then plug in an analogue phone, and can dial a IP
> phone. The number is as expected, the auto registration number (998000), and
> from a IP phone I can call the analogue phone(998000). Now I want to
> configure the line with the DID number (0113030656). I add it in the same
> partition as any other phone, and give it an international Calling Search
> Space. I save again, and reset and restart again. I also go to the ATA186
> and unplug the network cable and the AC adaptor to reset it. Problem is not
> that I cannot call the DID number(0113030656) from the same IP phone, which
> can call all other phones. This is definitely not a CSS or Partition issue.
> Problem now is that when I call the IP phone from the analogue, it still
> shows the auto registration number (998000). I can also not call any number
> that this part of this CSS I assigned to this line. Strangest thing is that
> it does not look like the DN configuration that I did on the line, get's
> applied to the line. I at first thought it is a faulty ATA, and got another.
> It does exactly the same thing. Now in trying to resolve the issue I found
> another problem. I delete the ATA, and it refuses to auto register again. I
> can add it manually, but it still does not work, unless I use the exact
> number it auto registered with. What I cannot understand is that we have
> about 20 SRST sites on the same cluster, and all of them has ATA's. No one
> has reported any issues.
>
>
>
>
>
>
>
> *Louis Koekemoer*
>
> Cisco IPT Systems Engineer
>
> Dimension Data
>
> Tel.          +27 (11) 575 6560
>
> Mob.       +27 (76) 608 7221
>
> Fax.         +27 (11) 576 6560
>
> Louis.Koekemoer at za.didata.com
>
>
>
> P Before printing I think about the environment
>
>
>
> For more information about Dimension Data, please go to *
> www.dimensiondata.com*
>
>
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
------------------------------------------------
Pavan Katta
CCVP,CCDP,CCNP,CCDA,CCNA
Development Engineer - Enterprise Voice
Cisco Systems Inc
--------------------------------------------------
Any opinions expressed in this email are my own personal opinions. I do not
represent Cisco and am not authorized to make any statement on their behalf.
----------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081009/767ac04f/attachment.html>