[cisco-voip] Remote worker/manually modify phone network settings.

[Drew Weaver]

Hi there,

We need to deploy an e-phone in a remote location which is connected to our main office via a VPN connection. At this remote location we use the IP Communicator and it works fine however we need to use an actual real phone.

The problem is, for the life of us we cannot figure out how to manually set the settings in the phone as the network in the remote location doesn't hand out the TFTP and other required information via DHCP.

Does anyone have any advice?

Thanks,
-Drew

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081022/1ec0a5a7/attachment.html>