[cisco-voip] hunt group and call-forward all

[James Buchanan]

Call forward all and call forward busy settings are ignored when using a
hung group.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dan Letkeman
Sent: Saturday, September 06, 2008 8:40 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] hunt group and call-forward all

Hello,

If I have this config setup so these three extensions ring when a call
comes into the pilot number, but one of the phones has call-forward
all set, it will not ring on the phone number that it is
call-forwarded to unless you call that phone directly.  Is this a bug?


voice hunt-group 1 parallel
 final 1599
 list 1501,1510,1511
 timeout 15
 pilot 1590

ephone-dn  1  dual-line
 number 1501
 label me (1501)
 name me
 call-forward all 1550
 call-forward busy 1500
 call-forward noan 1500 timeout 18

12.4(15)XZ / CME 4.3(0)

Dan.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip