[cisco-voip] Call Transfer Problem (Fuermann, Jason)

Tue Sep 9 17:48:55 EDT 2008

What ccm version and phone load?  I remember a ccm 5 install i did that had
this intermittent problem with the receptionist's phone.  It ended up being
phone load prob.

On Tue, Sep 9, 2008 at 4:30 PM, <cisco-voip-request at puck.nether.net> wrote:

> Send cisco-voip mailing list submissions to
>        cisco-voip at puck.nether.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://puck.nether.net/mailman/listinfo/cisco-voip
> or, via email, send a message with subject or body 'help' to
>        cisco-voip-request at puck.nether.net
>
> You can reach the person managing the list at
>        cisco-voip-owner at puck.nether.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of cisco-voip digest..."
>
>
> Today's Topics:
>
>   1. Re: howto: automatically backup cme config (Joe Cisco)
>   2. Right Fax (Ocampo, Walter)
>   3. Re: Call Transfer Problem (Fuermann, Jason)
>   4. Re: ata issue (Scott Voll)
>   5. Re: Unity 5.x Administration WebPage (Scott Voll)
>   6. Re: Right Fax (Scott Voll)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 9 Sep 2008 15:27:53 -0500
> From: "Joe Cisco" <smetsysocsic at gmail.com>
> Subject: Re: [cisco-voip] howto: automatically backup cme config
> To: "Ryan West" <rwest at zyedge.com>
> Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
> Message-ID:
>        <ae303060809091327o3600d3cm47c5218992666111 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> No problem on the hijack. When we install a new system we usually have
> the administrator use the CUE GUI, which obviously must be kicked off
> manually. However, it would be nice to be able to auto script it
> somehow.
>
> -Joe C.
>
> On Tue, Sep 9, 2008 at 3:10 PM, Ryan West <rwest at zyedge.com> wrote:
> > Not to highjack your post here, but has anyone figured out a way to auto
> backup the CUE config?
> >
> > -ryan
> >
> > -----Original Message-----
> > From: cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] On Behalf Of Joe Cisco
> > Sent: Tuesday, September 09, 2008 4:05 PM
> > To: cisco-voip at puck.nether.net
> > Subject: [cisco-voip] howto: automatically backup cme config
> >
> > I assume a large percentage of you may have already known this, but I
> > hadn't seen it and thought i'd post it. This a cheap/easy way to
> > automatically back up a CME (or any IOS device for that matter) if you
> > have an available FTP server. I think they started supporting this
> > somewhere in the 12.3 range of code.
> >
> > ! *** the following config will automatically back up the config
> > ! *** of the device to the folder of the ftp server listed in the
> > ! *** PATH statement every 10080 minutes (7 days). It will
> > ! *** also copy the config every time a "write mem" or "copy
> > ! *** run start" is issued.
> > !
> > !
> > ! *** set ftp server username
> > ip ftp username admin
> > ! *** set ftp server password
> > ip ftp password ftp-server-password-goes-here
> > !
> > !
> > !
> > archive
> >  path ftp://10.0.0.10/ucme-configs/router-hostname-here
> >  log config
> >  write-memory
> >  time-period 10080
> > !
> > !
> >
> > Later,
> >
> > Joe C.
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 9 Sep 2008 17:05:40 -0400
> From: "Ocampo, Walter" <WOCAMPO at broward.org>
> Subject: [cisco-voip] Right Fax
> To: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
> Message-ID:
>        <2BE4193B435B4045BD1A1ABBAB7B7149064FF10114 at MREXVS03.bc.broward.cty
> >
> Content-Type: text/plain; charset="us-ascii"
>
> Good afternoon,
>
> We are testing the Right Fax solution using Captaris.
> The way we set up is a gateway with H.323 protocol. The problem is that
> Captaris does not support access code for Long Distance. Is there a way to
> set the access code in the Gateway  Dial peer? or somewhere else,
>
> Thanks,
>
> Walter Ocampo
> System Network Analyst
> Office of Information Technology
> 540 S.E 3rd. Ave, Suite 300
> Fort Lauderdale, FL 33301
> (954) 357 8041 Cell (954) 632 8228
> wocampo at broward.org<mailto:wocampo at broward.org>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20080909/862f799c/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 3
> Date: Tue, 9 Sep 2008 16:20:12 -0500
> From: "Fuermann, Jason" <JBF005 at shsu.edu>
> Subject: Re: [cisco-voip] Call Transfer Problem
> To: "'cisco-voip at puck.nether.net'" <cisco-voip at puck.nether.net>
> Message-ID: <8FAC1E47484E43469AA28DBF35C955E416150544 at EXMBX.SHSU.EDU>
> Content-Type: text/plain; charset="us-ascii"
>
> I just had a report of this myself. User said it just randomly happens and
> there are no other incoming calls at the time (ruling out autoselect)
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] On Behalf Of Lisa Notarianni
> Sent: Tuesday, September 09, 2008 10:27 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Call Transfer Problem
>
> We are having an intermittent problem with calls coming in and no ability
> to transfer them.
>
> The softkeys at times available are ONLY:  Redial, CFwdALL, or New
> Call.   (the normal Hold, EndCall, Transfer and More do not appear).
>
> There were no other calls coming in and no one else was on any of the other
> lines at the time.
>
> Any ideas??
>
> Thank you...
>
> Lisa Notarianni
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 9 Sep 2008 14:24:52 -0700
> From: "Scott Voll" <svoll.voip at gmail.com>
> Subject: Re: [cisco-voip] ata issue
> To: "Mohammed Naviwala" <monavy at gmail.com>
> Cc: cisco-voip at puck.nether.net
> Message-ID:
>        <f84a38d30809091424x5e3ef29le28149b44ce9f32 at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Need a little more info.
>
> is RTP packets going across the WAN via G729?  This would be a problem
> change to G711.
>
> are all your Faxes, just dumb faxes?  eg. they only fax at 14.4k?  or can
> they fax Super G3 33.6k?  might be a trying to fax at 33.6 if the other fax
> supports it.  Work around turn off Super G3 on all your Fax machines and
> also turn off Error correction Mode (ECM)
>
> do you have a VGW set to Fax Relay?  all VGW should be set to Fax
> passthrough.
>
> hope that helps
>
> Scott
>
> On Tue, Sep 9, 2008 at 12:50 PM, Mohammed Naviwala <monavy at gmail.com>
> wrote:
>
> >  Hi,
> >
> > I have centralized CCM cluster deployment with cluster ove WAN. at one of
> > th branch office, we have installed some ata 186 for the fax connection.
> > some the atas are working fine. but issues of some 6-7 atas as in they
> can
> > send and receive fax within the cluster but while receiving fax from
> PSTN,
> > they receive just a blank page.
> >
> > help would be highly appreciated
> >
> > --
> > Best Regards
> >
> > Mohammed Abdul Razzaq
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20080909/28fae41f/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 5
> Date: Tue, 9 Sep 2008 14:29:01 -0700
> From: "Scott Voll" <svoll.voip at gmail.com>
> Subject: Re: [cisco-voip] Unity 5.x Administration WebPage
> To: "omar parihuana" <omar.parihuana at gmail.com>
> Cc: cisco-voip <cisco-voip at puck.nether.net>
> Message-ID:
>        <f84a38d30809091429x42121139g28be14638e871338 at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> you need ES 31 I believe.  open a TAC case to get it.
>
> Scott
>
> On Tue, Sep 9, 2008 at 12:40 PM, omar parihuana <omar.parihuana at gmail.com
> >wrote:
>
> > Hi List,
> > I've just completed the Unity 5.x installation and so far all are working
> > well, however some days ago, I cannot log into Administration web portal,
> it
> > take a long time for connect (and finally it never connect). Today the
> same
> > error appeared, after of put usr/pass the administration webpage never
> > appeared. I've checked IIS service and is running, the first time, I
> restart
> > the Unity and all start to work well. Today I've stopped the IIS service,
> > and after that the Administration webpage start to work. I've checked
> Event
> > viewer, and all seems ok! so what's happened? pls suggestion will be very
> > appreciated.
> >
> > Rgds.
> >
> > --
> > Omar E.P.T
> > -----------------
> > Certified Networking Professionals make better Connections!
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20080909/e90d1445/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 6
> Date: Tue, 9 Sep 2008 14:30:26 -0700
> From: "Scott Voll" <svoll.voip at gmail.com>
> Subject: Re: [cisco-voip] Right Fax
> To: "Ocampo, Walter" <WOCAMPO at broward.org>
> Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
> Message-ID:
>        <f84a38d30809091430n2e1af6b7w41a717b31cf3857f at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> could you set the fax to prefix the FAC?
>
> Scott
>
> On Tue, Sep 9, 2008 at 2:05 PM, Ocampo, Walter <WOCAMPO at broward.org>
> wrote:
>
> >  Good afternoon,
> >
> >
> >
> > We are testing the Right Fax solution using Captaris.
> >
> > The way we set up is a gateway with H.323 protocol. The problem is that
> > Captaris does not support access code for Long Distance. Is there a way
> to
> > set the access code in the Gateway  Dial peer? or somewhere else,
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Walter Ocampo
> >
> > System Network Analyst
> >
> > Office of Information Technology
> >
> > 540 S.E 3rd. Ave, Suite 300
> >
> > Fort Lauderdale, FL 33301
> >
> > (954) 357 8041 Cell (954) 632 8228
> >
> > wocampo at broward.org
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20080909/7adb0cc3/attachment.html
> >
>
> ------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> End of cisco-voip Digest, Vol 59, Issue 69
> ******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080909/376b99f4/attachment-0001.html>