[cisco-voip] UCX 6.0(1) Installation - LDAP AD security rights

[Matthew Linsemier]

All,

I have been working on installing UCX 6.0(1) and I am running into some
weird installation issues.  I am able to start the installation, bind to the
server using the LDAP account that I have been given to me by the network
administrator, and enter a profile name, but after that I receive the
following error:  

³An error occurred while processing LDAP entries.  The exception is:
csco_clss: LdapConnection::resolve() unable to resolve dn because an ou was
missing.²

Currently the ID that I am using has full control to the Cisco and Corp
(where are users are) containers and their subordinates, but not anything
else.  My base is set to ou=Cisco.  It definitely sounds like a security
rights issue, but I couldn¹t find any documentation on Cisco¹s site on what
settings the LDAP ID needs to have other than a blurb in the install guide
stating that it needs rights to the ³IP Telephony Tree²

Anyone that can point me to a document that has the security settings or
knows what they should be, please let me know.  My next route is to open a
TAC case.

Thanks,

Matt

CONFIDENTIALITY STATEMENT
This communication and any attachments are CONFIDENTIAL and may
be protected by one or more legal privileges. It is intended
solely for the use of the addressee identified above. If you
are not the intended recipient, any use, disclosure, copying
or distribution of this communication is UNAUTHORIZED. Neither
this information block, the typed name of the sender, nor
anything else in this message is intended to constitute an
electronic signature unless a specific statement to the
contrary is included in this message. If you have received this
communication in error, please immediately contact me and delete
this communication from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080917/d6cfe205/attachment.html>