[cisco-voip] UCM 6.1. Device Information (full information) is not found

[Scott Voll]

Change browsers.  I run into that kind of issue from time to time.

Scott

On Mon, Sep 22, 2008 at 11:34 AM, Terry Oakley <Terry.Oakley at rdc.ab.ca>wrote:

>  I have working phones and the system is functioning as it should.  Issue
> is that when I click on the IP address of a device, within Cisco Unified CM
> Administration page,  I get the Device Information page opening.  If I click
> on any of the 'links' within that Device Information page I see nothing.   I
> get a 400 error.  If I type the actual IP address into a new browser window
> it comes up with the same 400 error.
>
>
>
> This used to work wonderfully and all of a sudden quit.
>
>
>
> Any ideas?
>
>
>
> Thanks
>
>
>
> Terry
>
>
>
> Terry Oakley - Telecommunication Coordinator, Information Technology
> Services | Tel (403) 342-3521  |  Terry.Oakley at rdc.ab.ca |*Red Deer
> College <http://www.rdc.ab.ca/>*
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080922/39cd8f33/attachment.html>