[cisco-voip] Take incoming MGCP gateway out of production but keep up for testing?

[Jacquie Manick]

Is there a simple way to take a gateway out of service in CallManager
(or router) that is MGCP?  It is on 3825 router with 3 other gateways.

Yesterday had an issue with a DID circuit bouncing every five minutes
up/down.  We wanted to take it out of service for DID calls, but still
allow carrier to have it up for testing.  We did a shut on the interface
0/0/0:23, shutting down the signaling port for ISDN - which really shuts
down the whole circuit, but a few moments later it came back online
because CallManager controls the circuit and expected it online.

Shutting down the controller for the interface doesn't allow the carrier
to test all the way through.

Any help would be appreciated.  Jacquie Manick


CONFIDENTIAL:  
The information contained in this email communication is confidential information intended only for the use of the addressee.  Unauthorized use, disclosure or copying of this communication is strictly prohibited and may be unlawful.  If you have received this communication in error, please notify us immediately by return email and destroy all copies of this communication, including all attachments.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090401/eab75275/attachment.html>