[cisco-voip] Send out LD code on a PRI

[Jason Aarons (US)]

Since the call is "completed", then you get DTMF I don't see a way to do
accomplish your goal without some TCL or other IVR/UCCX type solution
for outbound dialing.

I would be interested long term what solution you attempt and how it
works out. I see this with customers about once a year..

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
Sent: Friday, April 10, 2009 12:00 PM
To: 'Ryan Ratliff'
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Send out LD code on a PRI

I get a second dial tone after my call has been setup from my gateway so
they need to see them as DTMF after the call is completed. 

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Friday, April 10, 2009 10:38 AM
To: Voice Noob
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Send out LD code on a PRI

Do you just need to prefix those 3 digits on every outbound call or  
is the provider expecting them as dtmf after the initial call setup?

If they just want to see those 3 digits at the beginning of the  
called party number the prefix command on the pots dial-peer or in  
CUCM should take care of it.

-Ryan

On Apr 10, 2009, at 10:34 AM, Voice Noob wrote:

I have seen this question posted but with no solution so I am going  
to ask again to see if anyone has a suggestion. I have CUCM 7.0 with  
an H.323 gateway and a PRI. The Telco is looking for a 3 digit code  
for all long distance calls that is then reported on to someone  
internally. I know I can do this in Call Manager but the powers that  
be will not change the requirement for the Telco side even though no  
one has looked at the reports in months. J So I want to add this code  
for all outgoing calls because I am too lazy to reach over to my  
phone and put the 3 digit code in especially when I use Click-to-Call  
or CUPC. I know I can make something in UCCX to do this but my UCCX  
box is only for testing and development and may not be up 100% of the  
time. I would be open to using a TCL script or even Unity Connection  
if someone has an example on how  to do this. I have tried using the  
prefix command but that is not working as expected. Does anyone have  
a solution to adding a 3 digit LD code to an outbound call on a PRI?





_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.