[cisco-voip] OT 3560 LX/LH

[Fuermann, Jason]

The 2 most common mistakes I've seen are
1) The fiber in the tray is not in the same order on both ends
2) I pair needs to be flipped (aka. Both sides are sending on the same pair)
Both these problems can be solved with a continuity test (shine a light)

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of A.L.M.Buxey at lboro.ac.uk
Sent: Thursday, April 16, 2009 3:34 AM
To: Scott Voll
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] OT 3560 LX/LH

Hi,
> I have two 3560's using LH sfp's with Single mode fiber.  but we just can't
> get the link to come up.
> 
> we have switched fiber strains, we have changed sfps/ swtiches.  I'm kind of
> at a loss.
> 
> any ideas?

without knowing your infrastructure and config - have you tested the fibre cores
to ensure light path is okay? what distance is the link? are the ports on thw switch
configured and not shutdown?  are these dual personality ports being used, if so
have you set the media-type? have you verified the SFP are okay - ie tested them in
another switch?

alan
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip