[cisco-voip] Unity Direct Routing Rules and translation-rules..

[Robin Clayton]

Hi Mark
 
That's seemed to have worked.
 
Cheers.
 
Rob
 
 
 


Richard Rose Central Academy 
Edgehill Road 
Carlisle 
Cumbria 
CA1 3SL 

Tel: 01228 822060 
Fax: 01228 822061 

http://www.richardroseacademies.org/ 

>>> "Turpin, Mark" <mark.turpin at calence.com> 24/04/2009 16:15 >>>

So.. almost.
There’s a few ways to do this.  The easiest would be to take the call
in directly as 875 (assuming there’s no overlap).  That means just
create a CTI Route Point in CCM and have its Directory Number as 875,
then have it set to call forward all to voicemail.  In Unity Connection
create a call handler (auto attendant) or a subscriber and set its
extension to 875.  At this point you can record greetings, set transfer
rules and caller input as you see fit.
If you have to translate the number you can do it on the gateway or in
CallManager.  But you don’t want to set it to 600.  You could use
something like 590 or 650 then follow the rest of the steps about
creating the CTI route point in CCM and replace the DN with whatever you
make it.  The #1 reason you don’t want to use 609 or 610 or 620 or
something would be future growth of your voicemail ports and then having
non-consecutive numbers jumbling up the config.
Hopefully this makes sense…  
This doc is a bit old, but still holds true on how to forward calls to
voicemail…
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dea82.shtml

--

MARK TURPIN  |  Systems Engineer  |  CCIE 21649 |  Insight Networking
|www.insight.com ( about:blankwww.insight.com )
t. 314.656.2315   c. 314.277.7948   f. 314.656.2355 
mark.turpin at insight.com
 
The information contained in this message and any attachment may
contain privileged or confidential information protected from
disclosure. If you are not the intended recipient, or an employee or
agent responsible for delivering this message to the intended recipient,
you are hereby notified that any review, dissemination, distribution or
copying of this information is strictly prohibited.  If you have
received this transmission in error, please notify the sender
immediately by replying to this message and destroying theoriginal and
all copies.  Thank you.

 

From:cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robin
Clayton
Sent: Friday, April 24, 2009 5:15 AM
To: cisco-voip at puck.nether.net 
Subject: [cisco-voip] Unity Direct Routing Rules and
translation-rules..

 

Hi Folkes 

 

We have CCM6.1 and Unity Connection 2.1.2

 

 

Currently our voice gateway has a translation-rule that converts 

 

860 to 600

 

and the voip destination is the call manager.

 

The call manager has the VM pilot point set as 600.

( ports 601-608 ) 

 

 

So all calls to 860 are piloted to end up at the Unity-box auto
attendant on one of the above ports.  ( this is our main reception
auto-attendant )

 

I now want to add a direct routing rule in Unity so that calls to
another number 875 go to a different  auto-attendant message for our
support department.

 

The unity directed-rules have "Dialled Number" as a field to match. if
I add a new translation rule on the gateway to translate 875 to 600 will
unity pick up 875 as the dialled number and direct the call to the
correct new auto-attendant or do I have to do more work????

 

Hope that makes sense...

 

Cheers in advnace

 

Rob

 

 

 

 

 

 

===============================
Robin Clayton
Network Manager 
Tel: 01228822075

 

 



Richard Rose Central Academy 
Edgehill Road 
Carlisle 
Cumbria 
CA1 3SL 

Tel: 01228 822060 
Fax: 01228 822061 

http://www.richardroseacademies.org/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090427/356ccfc5/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 7338 bytes
Desc: CompuServe GIF graphic
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090427/356ccfc5/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 7338 bytes
Desc: CompuServe GIF graphic
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090427/356ccfc5/attachment-0001.gif>