[cisco-voip] Faxing cuts off halfway through

[Matt Slaga (US)]

Are you attempting to fax over G729?  Is your fax machine configured to
use G3?

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Curtis, Adam
Sent: Tuesday, April 28, 2009 9:27 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Faxing cuts off halfway through

 

On Monday we started to run into an issue where faxes would start to
come in but then cut off halfway through. The same person can fax us a
document three times and two of those will cut off while the third one
finishes. Has anyone else run into this issue or have an idea of what
might be causing it? Our current setup is below, any help is
appreciated!

Thanks.

 

Cisco Call Manager 7.0(2)

Incoming T1 to Cisco MGCP FXS Port on the gateway

Fax is registered with Cisco Unified Communications Manager

 

 

Adam Curtis

Pizzagalli Construction Company

IT Support Technician

(802) 651-1319

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090428/5ecc54fe/attachment.html>