[cisco-voip] Hunt Pilot fast busy

Micah Bennett mbennett at als-xtn.com
Tue Apr 28 17:50:24 EDT 2009


Thanks.

 

I took a breath and looked back at everything.  I got it working with IP
phone extensions, but it still goes fast busy with Analog VG ports.

 

I am going to go the Hunt List route like the Unity ports and see how
that works. Thanks.

 

Micah Bennett 
Telecommunications Admin 
Active Outdoors 



  _____  

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, April 28, 2009 4:47 PM
To: Micah Bennett
Cc: Bill Talley; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Hunt Pilot fast busy

 

with AC config corrected then restart the AC service. since these are
analog ports there may be interesting issues with monitoring line state
via CTI.

your best bet is to go with the more native hunt pilot/hunt
list/linegroup configuration.  this is all built into ccm.exe natively
and does not depend on any CTI integration.

/wes

On Tuesday, April 28, 2009 4:38:32 PM, Micah Bennett
<mbennett at als-xtn.com> <mailto:mbennett at als-xtn.com>  wrote:



I found that finally, and it did not seem to help.  When I associated
it, it went from a fast busy to acting like it was stuck.  Don't
remember the details.  

 

I may try the hunt list setup like I have for my Unity and see how that
works.  

 

I just need a single incoming number to roll to 8 analog lines on my
VG224 that will be connected to a server for some download tasks.  It
worked a while back in my test but not now.

 

Thanks.

 

Micah Bennett 
Telecommunications Admin 
Active Outdoors 




From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, April 28, 2009 3:01 PM
To: Micah Bennett
Cc: Bill Talley; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Hunt Pilot fast busy

 

AC?  did you associate to the AC user?  Is the AC user CTI enabled?  Do
you have other functional AC Pilot Points?

/Wes

On Tuesday, April 28, 2009 3:24:55 PM, Micah Bennett
<mbennett at als-xtn.com> <mailto:mbennett at als-xtn.com>  wrote:




Check that.  All is good.

 

Micah Bennett 





From: Bill Talley [mailto:btalley at gmail.com] 
Sent: Tuesday, April 28, 2009 2:19 PM
To: Micah Bennett; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Hunt Pilot fast busy

 

I ran into this before and 'logged into hunt group' was unchecked on the
vg ports. After checking it, calls work as expecte

  _____  

From: Micah Bennett <mbennett at als-xtn.com> <mailto:mbennett at als-xtn.com>

Sent: Tuesday, April 28, 2009 1:45 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Hunt Pilot fast busy

Hello

I am trying to create a simple hunt group to some ports on my vg224.

I tested this before with regular IP phones and it worked fine.  

I copied an existing, working Hunt Pilot and assigned members to the
group as usual.

The new one rings fast busy.  I can't figure out what I am missing, or
if something is broken.  

Any help is appreciated.

Micah Bennett



[The entire original message is not included]

 
 
 



  _____  



 
 
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
  

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090428/60256679/attachment.html>


More information about the cisco-voip mailing list