[cisco-voip] E911 question - PSAP requiremetns

[Scott Voll]

I think its a little different going to PRI.  You now have to map DID's to
locations.  what application are you planing on using?  CER, Red Sky, etc.

Scott

On Thu, Apr 30, 2009 at 8:54 AM, Robert Kochis <bkochis at comcast.net> wrote:

> I have been asked about installing a PRI for E911 by my employer and I am
> wondering about the PSAP requirements for the Southeastern region of the US.
>
> I have done E911 before on smaller installations using POTS lines to one
> emergency center.
>
> My question is: Are most of the PSAP numbering the same or do differnet
> states require different numbering formats?
>
> 7, 8, or 10 digits such as:
>     voice-port 1/1/1
>     ani mapping 1 312
>     signal cama kp-npd-nxx-xxxx-st
>
> Thank you, Bob
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090430/5f93e610/attachment.html>