[cisco-voip] Unity Transfer Out of VM Fails

[Jeff Ruttman]

Greetings,
 
I have a call handler setup in Unity tied to "0" where a caller
listening to a VM greeting can press "0" and get to our operator.  It
works fine at our main site and works fine everywhere else too if the
call is internal.  Inbound calls from the outside fail.  After pressing
"0" Unity says "Wait while I transfer your call" and then after some
seconds, the call is dropped or at some sites I get a fast busy.
 
Any ideas?
 
Thanks
jeff
CONFIDENTIALITY NOTICE: The information contained in this email including attachments is intended for the specific delivery to and use by the individual(s) to whom it is addressed, and includes information which should be considered as private and confidential. Any review, retransmission, dissemination, or taking of any action in reliance upon this information by anyone other than the intended recipient is prohibited. If you have received this message in error, please reply to the sender immediately and delete the original message and any copy of it from your computer system. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091202/3893f197/attachment.html>