[cisco-voip] Polycom

[Bob Fronk]

I was hoping to be able to allow devices to call it and use meet me, etc.

I slapped an ATA on it for now, but wanted to eliminate that if I could.

From: Philip Walenta [mailto:pwalenta at wi.rr.com]
Sent: Saturday, February 21, 2009 8:04 AM
To: Bob Fronk; 'Scott Voll'; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Polycom

I'll answer Scott's question first:

While it can be configured as a Third Party SIP device, you lose features (no meetme, no conference, no call park etc).  It also is not supported by Polycom or Cisco.

Bob:

Are you looking to make it a device like phones so it cal dial devices inside CUCM, or simply make it so phones can call it?

________________________________
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matt Slaga (US)
Sent: Friday, February 20, 2009 2:36 PM
To: Bob Fronk; Scott Voll; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Polycom
Sounds like it should be configured as an advanced SIP device.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bob Fronk
Sent: Friday, February 20, 2009 3:31 PM
To: Scott Voll; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Polycom

On the same issue.... Has anyone setup a Polycom Viewstation FX as a device in Call manager?  I have been looking to see if it was possible but cannot find any information.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Friday, February 20, 2009 1:25 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Polycom

has anyone bought direct from Polycom (eg. the conference phones 7937 equivalent) and got it working on a CM 6.1 Cluster?  I'm just thinking if I can save some money. ;-)

Scott
________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090221/544b3716/attachment.html>