[cisco-voip] FXS port as extension

[Mark Holloway]

You do realize ephone stands for Ethernet phone, right?   Try a POTS dial
peer for your FXS port.


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ian Tait
Sent: Sunday, February 22, 2009 11:59 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FXS port as extension

Lads and lasses,

I'm missing something in my setup.

I've got a 3640 with 2 FXS ports, from which I can make calls, and
calling a local IP phone from an analogue phone attached to one of the
FXS ports, show up as the correct extension, but I can't call the
analogue extension from any other phone - busy tone.

IOS 12.4(21)

Relevant bits of config:
        
! FXS port...

voice-port 0/0/0

 station-id name 0

 station-id number 1004 


! dn for analogue phone...
ephone-dn  4

 number 1004  


I'm guessing I need to figure out the mac address of the port to put it
in the 'ephone 4' section, which is pretty bare at the mo :-)

If so, how do I do that? :-) Or what else may I have missed?

Thanks,

Ian
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip