[cisco-voip] FXS port as extension

[Jason Burns]

Sounds like you need a dial peer instead of an ephone-dn

dial-peer voice 1004 pots
 destination-pattern 1004
 port 0/0/0


Let me know how that treats you.

On Sun, Feb 22, 2009 at 1:58 PM, Ian Tait <ian.t at thoughtbubble.net> wrote:

> Lads and lasses,
>
> I'm missing something in my setup.
>
> I've got a 3640 with 2 FXS ports, from which I can make calls, and
> calling a local IP phone from an analogue phone attached to one of the
> FXS ports, show up as the correct extension, but I can't call the
> analogue extension from any other phone - busy tone.
>
> IOS 12.4(21)
>
> Relevant bits of config:
>
> ! FXS port...
>
> voice-port 0/0/0
>
>  station-id name 0
>
>  station-id number 1004
>
>
> ! dn for analogue phone...
> ephone-dn  4
>
>  number 1004
>
>
> I'm guessing I need to figure out the mac address of the port to put it
> in the 'ephone 4' section, which is pretty bare at the mo :-)
>
> If so, how do I do that? :-) Or what else may I have missed?
>
> Thanks,
>
> Ian
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090222/b957eae2/attachment.html>