[cisco-voip] FXS port as extension

[Ian Tait]

Hi,
 
A quick test of that still gives me a busy tone.
 
I'll play around with the idea though - thanks!
 
Ian


________________________________

	From: Jason Burns [mailto:burns.jason at gmail.com] 
	Sent: 22 February 2009 20:12
	To: Ian Tait
	Cc: cisco-voip at puck.nether.net
	Subject: Re: [cisco-voip] FXS port as extension
	
	
	Sounds like you need a dial peer instead of an ephone-dn
	
	dial-peer voice 1004 pots
	 destination-pattern 1004
	 port 0/0/0
	
	
	Let me know how that treats you.
	
	
	On Sun, Feb 22, 2009 at 1:58 PM, Ian Tait
<ian.t at thoughtbubble.net> wrote:
	

		Lads and lasses,
		
		I'm missing something in my setup.
		
		I've got a 3640 with 2 FXS ports, from which I can make
calls, and
		calling a local IP phone from an analogue phone attached
to one of the
		FXS ports, show up as the correct extension, but I can't
call the
		analogue extension from any other phone - busy tone.
		
		IOS 12.4(21)
		
		Relevant bits of config:
		
		! FXS port...
		
		voice-port 0/0/0
		
		 station-id name 0
		
		 station-id number 1004
		
		
		! dn for analogue phone...
		ephone-dn  4
		
		 number 1004
		
		
		I'm guessing I need to figure out the mac address of the
port to put it
		in the 'ephone 4' section, which is pretty bare at the
mo :-)
		
		If so, how do I do that? :-) Or what else may I have
missed?
		
		Thanks,
		
		Ian
		_______________________________________________
		cisco-voip mailing list
		cisco-voip at puck.nether.net
		https://puck.nether.net/mailman/listinfo/cisco-voip
		


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090223/cd38472b/attachment.html>