[cisco-voip] dial peer vs Translation-profile

[Scott Voll]

might look at trunk groups.  this would get all your voice ports into a
group then it's just one dial-peer pointing to the grooup of ports.

Scott

On Mon, Feb 23, 2009 at 10:09 AM, Scott Kee <SKee at cmsstl.com> wrote:

> Question for VoIP exporters.
> What is the best way to configure dial-peers on H323 gateway?
> It seems there are 2 ways to configure dial-peer:
> 1.  use dial-peer and use destination-pattern.  This way I have to create
> dial-peers for each port and destination-pattern.
> 2.  Translation-Profile: This way put all the dial-peers in the
> translation-profile and create minimal dial-peer.
>
> It seems using translation-profile is the way to do it.  Am I right?
>
> Thanks,
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090223/2096e3dc/attachment.html>