[cisco-voip] SRST PRI issue

[John Schlimgen]

What does a debug isdn q931 show?

On Fri, Jan 9, 2009 at 4:57 PM, Jack Martin <jackm at tushaus.com> wrote:

>  MGCP gateway running IOS 12.4(22)T
>
> Phones register to SRST gateway no problem, but when an outbound call is
> placed it will not route out the PRI.  There are POTS lines as backup.
>
> I checked all my dial peers and they look fine.  I ran dialpeer debugs and
> observed proper matches.
>
> dial-peer voice 1001 pots
> description Outbound SRST ISDN PRI
> translation-profile outgoing outbound-CLID
> preference 1
> destination-pattern 9T
> port 0/1/0:23
> !
> dial-peer voice 1002 pots
> trunkgroup SRST_POTS
> description Outbound SRST POTS
> preference 2
> destination-pattern 9T
>
> When the phones fallback to CUCM, calls  traverse the PRI as normal.
>
> Has anyone seen such behavior?
>
>
> *Jack Martin, CCVP*
> Network Engineer
> Tushaus Computer Services
> 10400 Innovation Drive, Ste 100
> Milwaukee, WI 53226
> 414.908.2222 Helpdesk
> 414.908.2267 Work
> 414.908.4467 Fax
> 414.477.6990 Cell
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090109/22e3ded0/attachment.html>