[cisco-voip] SRST PRI issue

[Alex Moya]

How are the route list set up


Sent from my iPhone

On Jan 9, 2009, at 8:27 PM, "John Schlimgen" <jschlimg at gmail.com> wrote:

> What does a debug isdn q931 show?
>
> On Fri, Jan 9, 2009 at 4:57 PM, Jack Martin <jackm at tushaus.com> wrote:
> MGCP gateway running IOS 12.4(22)T
>
> Phones register to SRST gateway no problem, but when an outbound  
> call is placed it will not route out the PRI.  There are POTS lines  
> as backup.
>
> I checked all my dial peers and they look fine.  I ran dialpeer  
> debugs and observed proper matches.
>
> dial-peer voice 1001 pots
> description Outbound SRST ISDN PRI
> translation-profile outgoing outbound-CLID
> preference 1
> destination-pattern 9T
> port 0/1/0:23
> !
> dial-peer voice 1002 pots
> trunkgroup SRST_POTS
> description Outbound SRST POTS
> preference 2
> destination-pattern 9T
>
> When the phones fallback to CUCM, calls  traverse the PRI as normal.
>
> Has anyone seen such behavior?
>
>
> Jack Martin, CCVP
> Network Engineer
> Tushaus Computer Services
> 10400 Innovation Drive, Ste 100
> Milwaukee, WI 53226
> 414.908.2222 Helpdesk
> 414.908.2267 Work
> 414.908.4467 Fax
> 414.477.6990 Cell
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090109/ba84c055/attachment.html>