[cisco-voip] Solition: SRST PRI issue

[Jack Martin]

I added the following to the config:

application
  global
  service alternate default


ccm-manager fallback-mgcp


It works like a champ!

Jack Martin, CCVP
Network Engineer
Tushaus Computer Services
10400 Innovation Drive, Ste 100
Milwaukee, WI 53226
414.908.2222 Helpdesk
414.908.2267 Work
414.908.4467 Fax
414.477.6990 Cell

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jack Martin
Sent: Friday, January 09, 2009 4:58 PM
To: cisco-voip at puck.nether.net
Cc: Mark Harcourt
Subject: [cisco-voip] SRST PRI issue

MGCP gateway running IOS 12.4(22)T

Phones register to SRST gateway no problem, but when an outbound call is placed it will not route out the PRI.  There are POTS lines as backup.

I checked all my dial peers and they look fine.  I ran dialpeer debugs and observed proper matches.

dial-peer voice 1001 pots
description Outbound SRST ISDN PRI
translation-profile outgoing outbound-CLID
preference 1
destination-pattern 9T
port 0/1/0:23
!
dial-peer voice 1002 pots
trunkgroup SRST_POTS
description Outbound SRST POTS
preference 2
destination-pattern 9T

When the phones fallback to CUCM, calls  traverse the PRI as normal.

Has anyone seen such behavior?


Jack Martin, CCVP
Network Engineer
Tushaus Computer Services
10400 Innovation Drive, Ste 100
Milwaukee, WI 53226
414.908.2222 Helpdesk
414.908.2267 Work
414.908.4467 Fax
414.477.6990 Cell



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090109/b0b22ed5/attachment.html>