[cisco-voip] question about this config---

[Tim Reimers]

That's what I was thinking ---
 
MGCP and config in the CM (other gateways listed first in the Route
List) are ensuring that traffic flows.
 
But I figured I wasn't brain dead -- those dial peers DO point at ports
that I believe have no wiring on them!
 
Tim Reimers
Systems Analyst II
Information Technology Services
City of Asheville
70 Court Plaza
Asheville, NC 28801
phone - 828-259-5512
treimers at ashevillenc.gov <mailto:timreimers at ashevillenc.gov> 
 

________________________________

From: Scott Voll [mailto:svoll.voip at gmail.com] 
Sent: Tuesday, January 27, 2009 10:58 AM
To: Tim Reimers
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] question about this config---


Those would only be used in case of MGCP fail over to H323.  So normal
operation would work with your CM config if you have the two ports that
have dial tone configured.  But in the case of a WAN outage you would be
correct that that site would not have dial tone.
 
Scott


On Tue, Jan 27, 2009 at 7:39 AM, Tim Reimers <treimers at ashevillenc.gov>
wrote:


	I'm looking at this and unless I'm crazy and have forgotten
basic dial peers functions, this won't do anything...
	 
	1760 outer has four FXO ports. It is running MGCP.
	 
	Note the voice ports 0/0 and 0/1 -- 
	I'm pretty sure from last I physically saw the device, ONLY
those two ports have any wiring on them.
	Ports 1/0 and 1/1 have NOTHING plugged into their jacks.
	 
	So to my way of looking at this, the dial-peers POTS 1000000 and
2000000 
	with a destination pattern of 9T are going to try to go out
those ports with nothing attached?
	 
	That HAS to fail, I would think...  right?
	 
	 
	"
	voice-port 0/0
	 supervisory disconnect dualtone mid-call
	 echo-cancel coverage 32
	 timeouts call-disconnect 5
	 timeouts wait-release 5
	 timing hookflash-out 50
	!
	voice-port 0/1
	 supervisory disconnect dualtone mid-call
	 echo-cancel coverage 32
	 timeouts call-disconnect 5
	 timeouts wait-release 5
	 timing hookflash-out 50
	!
	voice-port 1/0
	 supervisory disconnect dualtone mid-call
	 output attenuation 6
	 timeouts call-disconnect 5
	 timeouts wait-release 5
	 timing hookflash-out 50
	!
	voice-port 1/1
	 supervisory disconnect dualtone mid-call
	 output attenuation 6
	 timeouts call-disconnect 5
	 timeouts wait-release 5
	 timing hookflash-out 50
	 
	.
	.
	.
	dial-peer voice 99900 pots
	 service mgcpapp
	 port 0/0
	!
	dial-peer voice 99901 pots
	 service mgcpapp
	 port 0/1
	!
	dial-peer voice 99910 pots
	 service mgcpapp
	 port 1/0
	!
	dial-peer voice 99911 pots
	 service mgcpapp
	 port 1/1
	!
	dial-peer voice 1000000 pots
	 preference 1
	 destination-pattern 9T
	 no digit-strip
	 port 1/0
	!
	dial-peer voice 2000000 pots
	 preference 2
	 destination-pattern 9T
	 no digit-strip
	 port 1/1
	!
	dial-peer voice 2000 voip
	 incoming called-number .
	 dtmf-relay h245-alphanumeric
	 codec g711ulaw
	 no vad
	!
	 
	 
	 
	Tim Reimers
	Systems Analyst II
	Information Technology Services
	City of Asheville
	70 Court Plaza
	Asheville, NC 28801
	phone - 828-259-5512
	treimers at ashevillenc.gov <mailto:timreimers at ashevillenc.gov> 
	 

	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip
	
	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090127/11dba2b9/attachment.html>