[cisco-voip] question about this config---

[Dan Greenway]

If you are indeed using MGCP then dial peers 1000000 and 2000000 won't we used as they are h323.

So I don't think it would fail.

Thanks
Dan

________________________________
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim Reimers
Sent: 27 January 2009 15:39
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] question about this config---

I'm looking at this and unless I'm crazy and have forgotten basic dial peers functions, this won't do anything...

1760 outer has four FXO ports. It is running MGCP.

Note the voice ports 0/0 and 0/1 --
I'm pretty sure from last I physically saw the device, ONLY those two ports have any wiring on them.
Ports 1/0 and 1/1 have NOTHING plugged into their jacks.

So to my way of looking at this, the dial-peers POTS 1000000 and 2000000
with a destination pattern of 9T are going to try to go out those ports with nothing attached?

That HAS to fail, I would think...  right?


"
voice-port 0/0
 supervisory disconnect dualtone mid-call
 echo-cancel coverage 32
 timeouts call-disconnect 5
 timeouts wait-release 5
 timing hookflash-out 50
!
voice-port 0/1
 supervisory disconnect dualtone mid-call
 echo-cancel coverage 32
 timeouts call-disconnect 5
 timeouts wait-release 5
 timing hookflash-out 50
!
voice-port 1/0
 supervisory disconnect dualtone mid-call
 output attenuation 6
 timeouts call-disconnect 5
 timeouts wait-release 5
 timing hookflash-out 50
!
voice-port 1/1
 supervisory disconnect dualtone mid-call
 output attenuation 6
 timeouts call-disconnect 5
 timeouts wait-release 5
 timing hookflash-out 50

.
.
.
dial-peer voice 99900 pots
 service mgcpapp
 port 0/0
!
dial-peer voice 99901 pots
 service mgcpapp
 port 0/1
!
dial-peer voice 99910 pots
 service mgcpapp
 port 1/0
!
dial-peer voice 99911 pots
 service mgcpapp
 port 1/1
!
dial-peer voice 1000000 pots
 preference 1
 destination-pattern 9T
 no digit-strip
 port 1/0
!
dial-peer voice 2000000 pots
 preference 2
 destination-pattern 9T
 no digit-strip
 port 1/1
!
dial-peer voice 2000 voip
 incoming called-number .
 dtmf-relay h245-alphanumeric
 codec g711ulaw
 no vad
!



Tim Reimers
Systems Analyst II
Information Technology Services
City of Asheville
70 Court Plaza
Asheville, NC 28801
phone - 828-259-5512
treimers at ashevillenc.gov<mailto:timreimers at ashevillenc.gov>





This email is from 2e2 UK Limited.  The contents of this email and
any attachments are confidential to the intended recipient. They may
not be disclosed to or used by or copied in any way by anyone other
than the intended recipient. If this email is received in error,
please contact 2e2 UK Limited IT Support on +44 (0) 1635 520111 quoting the name
of the sender and the email address to which it has been sent and
then delete it.

Please note that neither 2e2 UK Limited nor the sender accepts any
responsibility for viruses and it is your responsibility to scan or
otherwise check this email and any attachments. 

2e2 UK Limited is a company registered in England with registered
number 4090390 whose registered office business is: The Mansion House
Benham Valence, Speen, Near Newbury, Berks RG20 8LU.  For further
information, please refer to www.2e2.com or, for general enquiries, please telephone +44 (0) 1635 568000.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090127/e3a95e9d/attachment.html>