[cisco-voip] Integration of CUPS 7.x with CUCM 7.x and Microsoft OCS

[Cristobal Priego]

Vaijanatah,

to get the status of the phone you need to configure a SIP trunk in CCM and
CUPS.
also you need to associate the line to the user.


also you're talking about IP Phone Messenger, that's something different.
there are a few setting on CUCM and CUPS that needs to be configured.

Cris
2009/7/2 vaijanath sonvane <vaijanathsonvane at gmail.com>

>  Hi All,
>
> We are integrating CUPS 7.0.3 with CUCM 7.0.2 and Microsoft OCS. At present
> we have integrated CUCM ver 7.0.2 with CUPS ver 7.0.3. I have followed the
> Cisco Guide as well as attached document. We are using the Cisco 7940. Done
> the following configuration for the IP Phone:
>
> 1. Configured SCCP IP Phone in CUCM with DN
> 2. Configured the End user and associated the configured IP Phone
> 3 Configured the end user on IP Phone configuration Settings as well as on
> DN.
> 4. Configured the IP Phone Service and Subscribed on the Phone.
> 5. Assigned the License capabilities for that user
>
> But when I Press the Services button on IP Phone I am getting the below
> message:
>
> "You were trying to access IP Phone Messenger service from a device not
> provisioned on Cisco CallManager server. Please work with your system
> administrator to get this device configured."
>
> Is there any problem in the configuration? Does anyone know what colud be
> the problem? How will I know the status of phone ( on-hook,off-hook etc.) on
> the dissplay of IP Phone.
>
> Please help.Thanks in Advance.....
>
> --
> Best Regards,
>
> Vaijanath Sonvane
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090702/c1d15ff2/attachment.html>