[cisco-voip] Integration of CUPS 7.x with CUCM 7.x and Microsoft OCS

[Cristobal Priego]

Vaijanatah,

on CUCM go to Device>Trunk
and configure a sip trunk, the Destination IP address is the CUPS IP
address, the destination port is 5060

on CUCM you need to create a Presence Gateway; Presence>Gateway , the
Gateway type is CUCM and the ip address of the pub
go to Presence>Settings  check the boxes for

Enable Instant Messaging (cluster-wide)
Enable/Disable ability for users to view presence on blocked users
Enable SIP Publish on CUCM

from the dropdown menu CUCM SIP Publish Trunk select Presence

then make sure that every single user has the DN associated to it

and you should be good to go, CUPC should display the phone status

let us know how it goes

Cris

2009/7/2 Cristobal Priego <cristobalpriego at gmail.com>

> Vaijanatah,
>
> to get the status of the phone you need to configure a SIP trunk in CCM and
> CUPS.
> also you need to associate the line to the user.
>
>
> also you're talking about IP Phone Messenger, that's something different.
> there are a few setting on CUCM and CUPS that needs to be configured.
>
> Cris
> 2009/7/2 vaijanath sonvane <vaijanathsonvane at gmail.com>
>
>>  Hi All,
>>
>> We are integrating CUPS 7.0.3 with CUCM 7.0.2 and Microsoft OCS. At
>> present we have integrated CUCM ver 7.0.2 with CUPS ver 7.0.3. I have
>> followed the Cisco Guide as well as attached document. We are using the
>> Cisco 7940. Done the following configuration for the IP Phone:
>>
>> 1. Configured SCCP IP Phone in CUCM with DN
>> 2. Configured the End user and associated the configured IP Phone
>> 3 Configured the end user on IP Phone configuration Settings as well as on
>> DN.
>> 4. Configured the IP Phone Service and Subscribed on the Phone.
>> 5. Assigned the License capabilities for that user
>>
>> But when I Press the Services button on IP Phone I am getting the below
>> message:
>>
>> "You were trying to access IP Phone Messenger service from a device not
>> provisioned on Cisco CallManager server. Please work with your system
>> administrator to get this device configured."
>>
>> Is there any problem in the configuration? Does anyone know what colud be
>> the problem? How will I know the status of phone ( on-hook,off-hook etc.) on
>> the dissplay of IP Phone.
>>
>> Please help.Thanks in Advance.....
>>
>> --
>> Best Regards,
>>
>> Vaijanath Sonvane
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090702/78222632/attachment.html>