[cisco-voip] PLAR and VM?

[Lelio Fulgenzi]

found this page... 

http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00800942a5.shtml#connection_plar 

it stipulates that plar-opx should be used to rollover to vm if the phone is not answered. 

i'm interested in the resolution. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Jonathan Madziarczyk" <JMad at cityofevanston.org> 
To: cisco-voip at puck.nether.net 
Sent: Tuesday, July 7, 2009 12:04:11 PM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] PLAR and VM? 




Hi, 



I’m a little unsure about how PLAR handles VM. I’ve got number 1234 on my gateway that does a PLAR to 4321. 



Number 4321 has a VM box and if I call 4321 directly it goes to VM after 4 rings. 



However if I dial 555-1234, it PLARs to 4321 but never goes to VM. Eventually after about 10 rings it hangs up on me. 



How can I get 1234 to go to a VM box if nobody answers the PLAR to 4321? 



JM 
_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090707/e6be8d63/attachment.html>