[cisco-voip] 881 MGCP Gateway FXS Issue

[Nick Matthews]

Quick check - make sure that 'show ccm | i Name' is what you have
defined in CUCM for the gateway.  That's about 80% of register
rejected causes.


-nick

On Tue, Jul 21, 2009 at 10:28 AM, Brian<bms314 at gmail.com> wrote:
> Has anyone got an 881 working as an MGCP gateway yet?  I have CUCM
> 6.1.3.3190 and 12.4(20)T3 on my 881 SRST routers.  The Gateways are
> registered and I can successfully register the FXO port and a IP Phone
> behind the router.  But the FXS port is always in a Rejected state from
> CUCM.  I have a 2811 with a 4FXS registered to the same CUCM without a
> problem.  MGCP is bound to the correct interface on the 881's.  I've also
> tried resetting the Gateway from CUCM as well as rebooting the 881 several
> times.  Anyone run into this before?
>
> Thanks,
> Brian
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>