[cisco-voip] microphone volume or g722 codec

[Josh Horton]

Good point. I'll just disable g722. Thanks!

On Fri, Jul 31, 2009 at 10:00 AM, Wes Sisk <wsisk at cisco.com> wrote:

>  We've heard this some.  What versions of CM and phone loads?  I believe
> there were some minor tweaks to desensitize.  However, the sensitivity is
> desired in some ways as that provides the higher fidelity sound.  You could
> always disable g722.
>
> /wes
>
> On Friday, July 31, 2009 10:55:21 AM , Josh Horton <jhorton at blindhog.net><jhorton at blindhog.net>wrote:
>
> Have any of you had users complain about microphones being too sensitive
> when using g722 ? Users are complaining that the new 7942/7962 phones are
> picking up conversations from another room.
>
>
>
>
> --
> Josh
>
> ------------------------------
>
> _______________________________________________
> cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>


-- 
Tips and Tutorials - Linux .: Cisco :. VOIP
http://www.blindhog.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090731/b301278e/attachment.html>