[cisco-voip] ATA 186 and WorkCentre 7655

[Scott Voll]

you will have to have the vendor change the default setting son the Xerox to
NO ECM (Error Correction Mode) and turn off Super G3 (33.6k) so It only uses
14.4k.
Scott

On Fri, Jun 5, 2009 at 8:49 AM, Nick Griffin <nick.jon.griffin at gmail.com>wrote:

> I've got a CME/SCCP controlled ATA 186 with a Workcentre 7655 all in one
> connected to line 1. Workcentre vendor is stating they don't work with an
> ATA, faxing seems to work intermittently. Has anyone seen this or have any
> recommendations? All calls out location gateway are G711.
>
> Thanks in advance,
>
> Nick Griffin
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090605/9f9e38ea/attachment.html>