[cisco-voip] PBX-to-IPPBX calls

[Ratko Dodevski]

Hi all;
I asked the customer to do the debug voip ccapi inout, make some calls and
send me the output. And he said that nothing came out. Does it need to be
combined with something else, cos this sounds impossible. I'm thinking to
delete all the dial peers and make only this two:

dial-peer voice 1 pots
 destination-pattern 38923141100
 progress_ind setup enable 3
 progress_ind alert enable 8
 port 0/3/0:15
!
dial-peer voice 20 voip
 destination-pattern .T
 progress_ind setup enable 3
 progress_ind alert enable 8
 voice-class codec 1
 session protocol sipv2
 session target ipv4:62.220.200.50:5060
 dtmf-relay rtp-nte h245-alphanumeric

Dial-peer  1 is for incoming calls to the PBX, and all the others are sent
to IPPBX via dial-peer 20.

Suggestions???

Regards
Ratko
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090609/4c4d5834/attachment.html>